Dual HandHeld Probe (DHHP)

Free Worldwide Shipping

The Dual HandHeld Probe (DHHP) is made with high insulated value plastics, ceramics, silicone wires and silicone wire sheaths. The control cable length is 80” and the high-voltage leads are 30kv silicone, 22 AWG wire with a silicone sheath to protect the 30kv wire from abrasion.

This DHHP will fit all burners that have a 7-pin connector on the front panel (May 2022 to present).

The DHHP can start and stop the burning process with the trigger, and adjust the output power with the thumbwheel.

The voltmeter shows the input voltage.

The DHHP has 2 probes and is very easy to position and burn.

The DHHP can be used to draw shapes while you burn.

The DHHP includes a “Hardware Key” (HK) in case you don’t want to use the DHHP. Insert the HK and use the Small Adjustable probes.